Eclipse avn5435 Manual de instalación

Be sure to read this installation manual thoroughly before carrying out installation and makingconnections. If installation methods or non-standard pa

-10-Notes on installation•Check the vehicle speed pulse signal, parking brake signal and reverse signal carefully before makingthe connections. If the

-11-Foot-operatedParking brakeParking brakeSignal CableHand-operatedParking brake-An example for connecting the parking brake signal -Use a splicing c

-12--Using the splicing connector -Insert the connection cable [vehicle speed pulsesignal cable (purple/white), parking brake signalcable (red/white)

-13-System connection eSystem connection examplexample•Never cut the insulation on the power cable or use it to power any other equipment. If the rate

-14-TipInstalling the GPS antennaInstalling the GPS antennaNotes on installation•The GPS antenna should be installed in a levelposition where the sign

-15--Installation inside the vehicle (example) -Choose an installation location on the dashboardwhich is flat and has a clear view of the sky.1Install

-16--Installation outside the vehicle (example) -Choose an installation location where the GPSantenna can be attached securely.1Remove the backing pap

-17-Installing the main unitInstalling the main unitRemove the pocket and any other accessoriesfrom the center cluster to make room for the mainunit.1

-18-

-19-

-2-ComponentsComponentsCheck that all of the following components are present Check that all of the following components are present GPS antenna compo

-20-090003-281207000412DE (CN)“ECLIPSE” is a registered trademark of FUJITSU TEN LIMITED in 48 countriesincluding the U.S. and Japan.

-3-Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on theAVN5435. They show safe and correct ways to hand

-4-•When routing cables, use care so that they do notcontact sharp metal parts such as brackets or screwtips. Otherwise, a short circuit, electric sho

-5-Installation DiagInstallation DiagrramamGPS antenna(When installing inside the vehicle)10GPS antenna(When installing outside the vehicle)10•If inst

-6-Names and functions of terNames and functions of terminalsminals•Never cut the insulation on the power cable or use it to power any other equipment

-7-B+ (Yellow)Connect where power is constantly available, regardless of the ignition key's position.ACC (Red)Connect where the power comes on wh

-8-ACC ON/OFF power supply terminal (blue/white)If you use this terminal to connect equipment such as an external amplifier, you can still hear the au

-9-Vehicle component adapter cable Vehicle harnessFrom main unit-Example of using vehicle adapter cables --Vehicle connections -•You will need to purc