Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 El manual del propietario descargar pdf (Pagina 58)

How to operate the receiver with an optional DSP/EQ unit connected

Fine-tuning EQ functions

After pressing the [FUNC] button, hold

button [2]

down for more than one second.

The EQ adjustment mode starts.

2. Tap

button [2]

until the desired equalizer mode is

displayed.

Tap the [AUDIO CONTROL] button to switch

frequencies.

The frequencies will switch in the following sequence:

4. Turn

the [AUDIO CONTROL] button to adjust the level.

Right :Increases the value.

Left :Decreases the value.

Hold down a button, [1] to [6], for more than two

seconds to preset a value.

The preset value is overwritten by the value set using

the above steps.

Push the

[FUNC] button

This cancels the adjustment mode. The selected value

will now take effect.

63Hz 125Hz 250Hz 500Hz 1kHz 4kHz 12.5kHz

[AUDIO CONTROL] button Buttons [1] to [6]

[FUNC] button

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

Sin comentarios

Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 El manual del propietario Pagina 58